Year of commercialization: 2015
1-Tighten all visible screws
2-Check the stabiliser runners
Loosen by one turn and then really tighten the pedal screws.
1- Check that one of the metal connector strips is not twisted
2 -At the back of the console: check that the connection has been properly made.
At the junction of the frame and the structure: check that the connection has been properly made.
1Use with batteries: Check that the batteries are properly positioned with the correct +/- polarity. If the problem persists, start again with new batteries
1Use with the mains socket:Ensure that the adapter is connected correctly to the bike, is connected to the mains, and make sure that your socket works.
2At the back of the console: check that it is properly connected.
2 At the junction of the frame and structure: check that the connection is properly made.
1-Check the connection of the connector coming out of the handlebars
2-Moisten your hands slightly and place both hands on the sensors
Look for the part number and click on 'NO’